Tuesday, June 26, 2007

Voles and Vole Control - Part 10 of 11 - Vole Damage Prevention - Create Your Own Raised Planter Box Liners


This article may be viewed in its entirety on our website Vole control, Mole control, Gopher control: Crittergetteronline Home. Select your desired link from the "Critter Confused" navigation box on the left.

This preventative measure requires the use of ½-inch hardware fabric, which can be found at most hardware stores (hardware fabric is welded wire mesh similar to "chicken wire" but has smaller hole spacing. It is available in a range of sizes from ¼-inch up and a plethora of lengths and widths.). Tools required are: tin snips (to cut wire to length), roll of utility wire (fine gage, for constructing baskets), pliers, gloves (wire is sharp), and a staple gun (for raised boxes).

I create raised beds using redwood 2x12, retaining wall stock if available. Retaining wall stock or "rough redwood" material tends to be thicker and better suited for ground contact – Do Not Use pressure treated lumber in your garden, the chemicals used to make this material are highly toxic and will poison your plants. I build my raised beds 4-feet wide to facilitate the use of 4-foot wide hardware cloth (largest width available). Boxes may be constructed larger than this dimension, however, the seam between the two sections of hardware cloth will need to be "stitched" together as would be any end seams if it breaks in the center of the box. Once the box is assembled (use galvanized nails), select a top, flip the box upside down and staple the hardware cloth to the box with the longest galvanized staples you can find. Don’t be shy with the staples; use a lot of them. Right side the box and fill with soil. Check the integrity of the wire every couple years and replace when necessary.



    Acknowledgment:
  • O'Brein, John M., 1994. Voles: Prevention and control of wildlife damage. Agricultural Programs Coordinator. Nevada Department of Agriculture

  • University of Michigan Museum of Zoology - Animal Diversity Web


Recent Website updates/changes:

No comments: